|You Save: $370.00|
The F57B1026 is a flush, ceiling mounted Honeywell industrial commercial air cleaner. It cleans by removing particulates from the air passing through the electronic cells. This filter is certified to be 94% efficient at capturing 0.5 micron air borne particles that pass through the filter such as pollen, cat dander, dust, tobacco smoke, and mold spores. Recommended for rooms up to 600 square feet. It's attractive white grill matches typical overhead fixtures and blends right into the surroundings. This model is deployed in businesses where particle counts are high: offices, break rooms, reception areas, computer rooms, and copy centers to name a few.
All F57 models are designed for efficient Coanda airflow and energy-savings. This ensures that purified, conditioned air is re-circulated evenly throughout the room. Coincidently, it also tends to reduce cycling of the HVAC system by re-circulating conditioned air. Engineered for recessed applications such as drop ceilings, it fits neatly in a 2 feet by 2 feet ceiling panel. The three-speed pushbutton switch allows control of air flow and sound level.
Reliability is built right in. A solid state power supply for consistent voltage output, built-in performance indicator, high/low performance switch, commercial-duty air cleaner cells and maintenance free motor with sealed bearings.
Maintenance takes just minutes with no tools required. The grill swings down effortlessly for prefilter and electronic cell cleaning or replacement and is removable for easy cleaning. These commercial air cleaners are simple to install, operate, and maintain and are backed by a one-year limited warranty.
Average Rating Based on 2 reviews: (4.5)
Works for residential, too! - 04/30/2017
Reviewer: Mark in Reno, NV
After another long Winter living in a closed up house, we decided to install an air cleaner to freshen things up, remove odors from cooking and smoke. This unit Honeywell F57B was the only unit we could find that had dimensions that would fit a residential stick-built house. My wife insisted on a flush-mount so that greatly narrowed our choices. Our house has trusses 24 on center, so it was a good fit be sure to measure VERY carefully. Build a box between the trusses for adequate support and screw the housing into the box. Position the housing about 1/16 above the sheet rock to accommodate the trim pieces. Be sure to notch the box out so the hinges and latches work properly. Replace the ionizer and grate. Wire it up and you're good to go! A little more work than I expected, but the results will be worth it.
Reviewer: Mark Uhlig
So far so good , had it running for 48 hrs in meeting room ,seems to be working fairly good cleaning the air . Wiil need more time to be sure
We make it as easy as possible to ensure you get the lowest prices available: